Skip to content

Roofing proposal template

Scope, three shingle lines priced side by side, how the money is scheduled, and the date the price stops holding. A template for the conversation before the contract, not the contract. Print it or save it as a PDF, free.

Your business

Saved in this browser and shared by your estimates, invoices and proposals, so you only type it once.

The job

Thirty days is the trade's habit. Material prices move; a proposal with no end date is one you can be held to in a different market.

The line a homeowner argues about later is the one that was never written down. Decking, rot, a chimney rebuild — name what is quoted separately.

The three options

Squares of shingles to order, waste included — the figure the squares calculator gives. Every option is priced on it.

The budget strip shingle. Same coverage, more pieces, more nails.

The default residential shingle. GAF Timberline HDZ and equivalents.

Heavier laminated shingles sold at 4 or 5 bundles per square. Check your line's data sheet: some are 5 bundles, not 4.

Included in every option

Tear-off, underlayment, the steep-pitch charge, vents, boots, flashing, the dumpster — whatever does not change with the shingle.

Blank uses the trade's habit: 2% of the job up to $100,000, 1% above it. Leaving a small share to the end is what stops you chasing the whole balance.

Terms

The first line says it is not a contract. Keep that one; the rest are yours to replace.

The options, priced

Put in the roof size and an installed price per square for a shingle line.

Needs your business name.

Free: carries a “Made with RoofParrot” line in the footer.

Printing opens your browser’s dialog, where “Save as PDF” is one of the printers. The estimate-PDF button on each option sends its lines to the estimate maker, which makes the file.

Now measure the real roof

The numbers above are free, now and always, on a tier that takes no card. Type the address, trace the roof on the satellite photo, and the squares come back priced and ready to send to the homeowner.

What prints

Your business name

PROPOSAL

Number:
P-1001
Date:
November 16, 2026
Price holds until:
December 16, 2026

Prepared for

Customer name

Tear-off and re-roof

Scope of work

  • Tear off the existing shingle layer and haul away the debris.
  • Install synthetic underlayment, starter, field shingles and hip and ridge cap on the line you choose.

Not included

  • Decking repair beyond the tear-off, if found, is quoted separately.

Choose a shingle line

The priced options appear here.

Terms

  • This is a proposal, not a contract. Prices hold until the date shown above.
  • Quantities are calculated from the measurements supplied and include the waste allowance shown.
  • Material prices are subject to supplier change until the order is placed.
  • Work not described above is not included and will be quoted separately.

Made with RoofParrot — roofparrot.com

The formula
shared lines = everything that does not change with the shingle option price = shared lines + (squares × that line's installed price per square) + tax tax = taxable subtotal × tax rate (once, per option, not per line) deposit = option price × deposit rate retained = option price × retainage rate (2% up to $100,000 of job, 1% above) balance = option price − deposit − retained (absorbs the rounding, so the three sum exactly)

A proposal is one job priced three ways, so the arithmetic is the estimate’s, run three times. The lines that do not change with the shingle — tear-off, underlayment, vents, the dumpster — are entered once and carried into every option; the only thing that differs between Good, Better and Best is the shingle line and its installed price per square. The option names are the shingle lines the squares calculator orders by, so a homeowner who picks one is picking a product, not a mood.

The schedule is built by the same function the app uses when a quote is sent. Three percentages of a price almost never round to three figures that sum to it, so the balance is the stage that absorbs the cent or two — deliberately and visibly — rather than the sheet printing stages that do not add up to the total above them.

Worked example: the demo’s job, priced three ways
Roof
26.4 squares of shingles, waste included
Shared lines
7 lines that do not change with the shingle, $5,307.00 together
Three-tab
$425.00 a square, installed
Architectural (laminated)
$450.00 a square, installed
Premium / designer
$525.00 a square, installed
Schedule
30% deposit, the usual retainage, the balance between
  1. Shared lines. Tear off 1 layer and haul away $2,400.00, Underlayment $432.00, Steep pitch charge (8/12) $1,080.00, Ridge vent $360.00, Pipe boot $135.00, Chimney flashing $450.00, Dumpster $450.00 — $5,307.00 in every option.
  2. Three-tab. 26.4 × $425.00 = $2,400.00 for the shingles, plus $5,307.00 shared, is $16,527.00.
  3. Architectural (laminated). 26.4 × $450.00 = $2,400.00 for the shingles, plus $5,307.00 shared, is $17,187.00.
  4. Premium / designer. 26.4 × $525.00 = $2,400.00 for the shingles, plus $5,307.00 shared, is $19,167.00.
  5. Schedule on Architectural (laminated). Deposit $5,156.10; Balance $11,687.16; Retained · 2% until sign-off $343.74. The three sum to $17,187.00 exactly.

Three-tab $16,527.00, Architectural (laminated) $17,187.00, Premium / designer $19,167.00.

Figures from The same job as a complete estimate, line by line; The shingle lines and their coverage, with sources.

Questions

What is the difference between a proposal and an estimate?
An estimate is one price for one specification. A proposal is the conversation before that: what the work is, what it is not, two or three ways of doing it at different prices, how the money would be scheduled, and how long the figures hold. The homeowner picks an option; the estimate — and then the contract — is written for the one they picked. Each option here has a button that hands its lines to the estimate maker for exactly that reason.
Is this a contract?
No, and the first line of the default terms says so. Nothing here is signed, and we do not offer a signature. A proposal is what you agree the job is before anybody writes the paper that binds either side; that paper is yours, or your lawyer’s, and the figures on it should match the option the homeowner chose here.
Where do the Good, Better and Best names come from?
They are the three shingle lines in the materials table — Three-tab, Architectural (laminated) and Premium / designer — the same ones the squares calculator orders by and the AI quote prices. Naming the option after the product rather than after an adjective means the homeowner is choosing something that exists, and the order list for the job they pick is one tap away.
Why is retainage on a proposal at all?
Because the schedule is settled at quote time or not at all; afterwards it is a renegotiation. The contractors whose advice we read were clear that leaving a small share — two percent on a residential job — until sign-off is what stops the whole balance being chased. Putting it on the proposal means the homeowner saw it before agreeing to anything. You can set it to zero.
Does it make a PDF?
Two ways. The whole proposal prints from this page, and the browser’s print dialog saves it as a PDF. And each priced option carries its lines to the estimate maker, which generates a proper estimate file for that option alone — the thing you send once the homeowner has chosen.
What does the free version carry?
One line in the footer saying it was made with RoofParrot. Everything else — the scope, the three prices, the schedule, your license number — prints in full. Paying removes the line.
Roofing proposal template: good, better, best · RoofParrot