Free roof measurement: what is free, what is not, and what the reports cost
You can measure a roof from a satellite photo for nothing. Here is exactly what that gets you, the three things it cannot do, and what you would pay to have somebody else do it.
The short answer
The free part is you tracing the roof yourself on satellite imagery. In RoofParrot you type the address, draw the roof outline on the photo, set the pitch, and the squares, pitched areas and edge lengths come out — then the job gets priced and sent to the homeowner. The free tier takes an email and a code to sign in, no card, and holds 3 live jobs at a time with 3 AI-written quotes a month. It does not expire.
What is not free anywhere is a measurement report with somebody else’s name on it. Those run $13 to $24.25 a roof for an ordered satellite report (RoofSnap to EagleView), read from the vendors’ own pages on 8 November 2026.
What you get from the trace
A traced outline is the roof’s horizontal footprint seen from above, which is exactly what the slope factor converts: footprint times the factor for the pitch you set is the sloped surface, and that divided by 100 is the squares. From the same outline come the eave, rake, ridge and hip lengths, which is what the starter, drip edge and cap are ordered from. The result is the same takeoff the squares and materials calculator produces from a typed footprint, with the measuring done on the picture instead of with a tape.
For ordering and bidding that is what most of the trade already works from — off the picture first, then field-checked before the material goes on. The trace is good for the number you put on your own order and your own quote.
What the trace is not
- It is not a certified report. Nobody signs it off and no third party’s name is on it. If a carrier, a desk adjuster or a builder needs to recognize the number, they want a report from a service they already accept — EagleView is the one adjusters accept, and nothing you produce yourself substitutes for it, including a number produced here. Buy that report for the claim and bring the figures back for the arithmetic.
- It cannot see anything vertical. A photo from above shows the footprint. A dormer cheek, a gable wall above a lower roof, the side of a chimney — anything that stands up — has no footprint and does not appear in the trace. Those surfaces are small on most houses and they are not zero, which is part of what the waste allowance on a cut-up roof is for.
- The photo can be years old. Satellite and aerial imagery is as current as the day it was flown, and that can be a long time ago. An addition, a re-roof with a different line or a tree that has since come down will not be in it. The pitch is yours too, not the picture’s: a one-step pitch error on a 6/12 moves the area about 3%, so read it off the roof, not off the screen.
None of that is a reason not to trace. It is the reason to go on the roof before you sign anything, which was true of a tape measure too.
What the paid services charge
The ordered satellite report most roofers mean ran $13–$24.25 a roof on 8 November 2026; the whole market, from a human-checked AI report to a complex roof on a pay-per-project plan, runs $10 to $69 (Instant Roofer to Hover). You pay per roof measured, not per job won. Each figure below was read from the page it links to, on 8 November 2026.
| Service | Per report | How it measures |
|---|---|---|
| Roofr | $19 ordered on Starter, $13 on paid plans; draw it yourself for $2–$4.50 an image | Yes — ordered, or trace it yourself |
| EagleView | $18 (Bid Perfect) · from $24.25 (Premium Roof) | Yes, ordered |
| GAF QuickMeasure | $18 for Master Elite contractors · $20 for everyone else | Yes, ordered |
| Pitch Gauge | From $15 a roof, no upcharge for large roofs | Yes, ordered |
| Instant Roofer | None for the AI report · $10 human-checked | Yes — AI, from the address |
| RoofSnap | Draw it yourself: included · ordered from $13 | Yes — included, or ordered |
| iRoofing | Draw it yourself: included · perimeter report $10 | Yes — included, or ordered |
| Hover | $29 / $49 / $69 a roof pay-as-you-go; $9 / $29 / $49 on the $999 plan | Yes, from photos you take |
Other people’s prices on other people’s pages: they move without telling us. The comparison page has the yearly prices too, a line on each saying what they do better than we do, and the break-even arithmetic.
Which one you want
- Quoting your own work: trace it. The number is for your order and your bid, you will field-check it anyway, and there is no fee per roof to stack on the ones you do not win.
- A claim, a supplement or a builder’s package: buy the report. It is documentation a desk adjuster recognizes, and your own tape numbers are the claimant’s numbers whoever took them.
- Already on the roof: you have the measurements in your hand. Type them into the calculators and skip the picture.
Measure one and see
Type an address, trace the roof, set the pitch. If the squares and the edge lengths are ones you would put on an order, the free tier is enough to find that out: 3 live jobs, an email and a code to sign in, no card.
Questions
- Is there a catch to the free tier?
- The limits are the catch, and they are the whole of it: 3 live jobs at a time, 3 AI-written quotes a month, and our name rather than yours on the quote the homeowner opens. There is no per-roof fee, no trial clock and no card. Paying removes the cap and puts your name on the quote; the pricing page has the figure.
- How accurate is a roof traced from a satellite photo?
- As accurate as the outline you draw and the pitch you set. The footprint is usually the easy part; the pitch is where the error lives, because the picture cannot tell you it, and on a 6/12 one step either way moves the area about 3%. The honest answer for any method, ours included, is that the number you order from should be checked on the roof.
- Can I use it on my phone?
- Yes, and that is how it is meant to be used — on the driveway, before the homeowner has closed the door. Fetching the photo wants a connection; once it is on the device the tracing, the pricing and the estimate PDF keep working with no signal, and the quote goes out when you have bars again.